V2000-c Rfid Access Control User Manual Guide

The system is a popular, standalone security solution designed for small to medium-sized businesses, residential complexes, and secure storage areas. This guide serves as a comprehensive manual to help you install, program, and maintain your device. 1. Introduction & Specifications

The V2000-C is a single-door multifunction standalone access controller. It supports up to and allows access via RFID card, a 4-to-6 digit PIN, or a combination of both. Operating Voltage: DC 12V ± 10% User Capacity: 2,500 Card Reading Distance: 3–6 cm Active Current: Lock Output Load: Max 3A Operating Temperature: -45°C ~ 60°C 2. Installation and Wiring V2000-c Rfid Access Control User Manual

Enter programming mode, then press 0 + [New 6-digit Code] + # + [Repeat New Code] + # . 4. User Management Adding Users (Card or PIN) Enter Programming Mode. Press 1 . For Card: Swipe the RFID card. The system is a popular, standalone security solution

To adjust how long the door remains unlocked (0-99 seconds): Enter Programming Mode. Press 4 + [0-99] + # . (Default is 5 seconds). Access Mode Configuration You can choose how users authenticate: Press 3 + 0 + # Card OR PIN: Press 3 + 1 + # (Default) Card + PIN: Press 3 + 2 + # 6. Resetting to Factory Defaults Introduction & Specifications The V2000-C is a single-door

Press * + 999999 + # . (The indicator light will turn orange/flashing). Exit Programming Mode: Press * .