Unlock Bootloader Using Termux | Link !full!

Run the following command to reboot the target device into the bootloader: adb reboot bootloader Use code with caution.

Once the target phone shows the "Fastboot" or "Bootloader" screen, verify the connection again: fastboot devices Use code with caution. Step 6: Unlock the Bootloader

Depending on your device age/brand, use one of these commands: fastboot flashing unlock For older devices: fastboot oem unlock unlock bootloader using termux link

Ensure you are using a high-quality data cable. Some "charging-only" cables will not establish the data link.

On the "Host" phone (the one with Termux installed), open the app and run the following commands to set up the necessary tools: Run the following command to reboot the target

On the target device, you will usually see a confirmation screen. Use the to highlight "Unlock the Bootloader" and the Power Button to confirm. Troubleshooting Common Link Issues

When the popup appears on the target phone asking to , tap "Always allow." Step 4: Verify the Connection In Termux, type: adb devices Use code with caution. Some "charging-only" cables will not establish the data link

Enable (Crucial: If this is greyed out, connect to Wi-Fi or wait a few days as per your manufacturer’s policy). Enable USB Debugging . Step 2: Install ADB & Fastboot in Termux

pkg update && pkg upgrade pkg install tur-repo pkg install android-tools Use code with caution. Step 3: Connect the Devices

This allows you to connect two phones together.