If the battery is non-removable: Make sure the phone is completely switched off before connecting the USB cable while holding the Volume Down or Volume Up button. 6. Use a Different Version of SP Flash Tool

Encountering an error while flashing firmware on a MediaTek (MTK) device is a common issue for Android customizers and technicians. Among the most frustrating is the . This error usually manifests with a message like: BROM ERROR: S_FT_DA_NO_RESPONSE (1042) .

Not necessarily. In most cases, it is a software communication issue. The phone is in a "soft brick" state, which can be fixed once the connection between the PC and BROM is established. Summary Checklist Fix physical connection Use USB 2.0 Port Ensure stable communication Install VCOM Drivers Ensure PC recognizes phone Toggle Battery Wake up BROM Change DA File Overcome security limitations

It means the tool has failed to establish a handshake with this low-level component, often because the Download Agent (DA) cannot communicate with the processor [1]. Common Causes of BROM ERROR 1042

Sometimes the preloader file in the firmware causes a conflict.

The is a communication failure between the SP Flash Tool on your computer and the Boot ROM (BROM) of your MediaTek device.