: Non-original "generic" silkscreens often use white plastic mesh. The sensor's light reflects off this mesh, tricking the machine into thinking a master is still attached.
: Some users find success by placing a small piece of matte black gaffer tape over the strip to improve light absorption. 3. Reset and Service Mode
: A used master master is actually stuck on the drum or failed to eject into the disposal box. riso error a16-525
: If using an aftermarket screen, use a black permanent marker (Sharpie) to darken the entire black strip and the area around it to ensure no light reflects back to the sensor.
If the error persists on a clean drum, it is likely an optical detection issue. : Non-original "generic" silkscreens often use white plastic
: The machine uses an optical sensor to detect masters. If the sensor is dirty or blocked, it may falsely report a master is present.
: Wipe the small black velvet strip (usually near the clamp) with a dry cloth to remove paper dust. If the error persists on a clean drum,
If physical cleaning doesn't work, you may need to clear the machine's state:
First, physically remove the drum and verify there is no master attached. Check the for jams or broken transfer belts, which can prevent the master from leaving the drum area. 2. The "Sharpie Trick" (For False Errors)
: There is a small black velvet strip on the drum meant to absorb sensor light. If this strip is worn, dusty, or missing, the sensor detects reflection from the metal drum instead.