: Open the software and navigate to the "Dossier" section to enter the test subject's basic information, such as name, gender, and birthdate.
To successfully set up your new analyzer, follow these sequential steps: :
: If you are using Windows 10, 8, or 7, right-click the setup file and select "Run as administrator" to prevent installation errors. quantum resonance magnetic analyzer 43 0 setup new
: The subject must grasp the testing rod or place their palm flat on the sensor pad. Ensure they maintain direct skin contact without moving or wobbling during the process.
Follow the prompts in the setup wizard, clicking "Next" until you reach the "Finish" button. : Open the software and navigate to the
Ensure the indicator light on the analyzer or the encryption key is steady. A flickering light often indicates a failed driver installation or poor connection.
: This error occurs if the software is launched before the USB dongle is inserted or if the dongle's drivers haven't loaded. Try a different USB port or restart the software as an administrator. Ensure they maintain direct skin contact without moving
Insert the installation CD or the "golden" USB flash drive into your computer.
: The person being tested should be relaxed, breathing steadily, and should not speak during the scan.
your computer immediately after the installation to finalize the software registration. Hardware Connection :
