Pollyfan Nikole Install [exclusive] -

Carefully lift the assembled fan motor and seat the "ball" end of the downrod into the mounting bracket. There is usually a small groove in the ball that must line up with a tab on the bracket; this locks the fan in place and prevents it from spinning during operation. Step 4: Wiring the Pollyfan Nikole Most Nikole models come with a remote control receiver.

The Pollyfan Nikole uses a specialized bracket designed to minimize vibration. Remove your existing light fixture or old fan. pollyfan nikole install

Slide the receiver into the mounting bracket above the downrod ball. White to White: Neutral wires. Black (or Blue) to Black: Power/Lead wires. Green/Copper to Green: Ground wires. Carefully lift the assembled fan motor and seat

If you’ve just unboxed your new Nikole, you might be looking at the hardware and wondering where to start. Don’t worry—installing this fan is a straightforward DIY project. Here is everything you need to know to get your Pollyfan Nikole up and running. Pre-Installation Checklist The Pollyfan Nikole uses a specialized bracket designed

If your Nikole includes an LED kit, plug the quick-connect wire harness together and screw the light pan into the bottom of the motor. Snap the glass shade or diffuser into place. Testing Your Installation