Point-n-measure Digital Tape W5746 User Manual |verified| Now

Measure the , then the Width , then the Height of the space.

The laser is for aiming purposes only. Note that the actual measurement is taken by the ultrasonic sensor; ensure the path is clear. Point-N-Measure Digital Tape W5746 User Manual

The device can measure from the (bottom of the tool) or the Top . Ensure you know which setting is active so you don't accidentally add or subtract the length of the tool itself from your total. 3. How to Take Measurements Single Distance Measurement Measure the , then the Width , then the Height of the space

This usually means the device is too close to a surface (under 2 feet) or the signal is being absorbed by a soft surface (like curtains). Try measuring against a solid, flat wall. The device can measure from the (bottom of

Press the button. The distance will appear on the LCD screen. Calculating Area (Sq. Ft / m²) Press the AREA button. Measure the Length of the room (Press READ). Measure the Width of the room (Press READ).

The laser can cause permanent retinal damage. Keep out of reach of children.