The NT18B07 is designed for 18-gauge brad nails ranging from 5/8" to 2" in length. Remove the battery for safety.
💡 Keep the magazine clean of sawdust to prevent feeding issues. nt18b07 manual
Insert a fully charged 18V Lithium-Ion battery into the base until it clicks. Press the power button (if equipped) to activate the internal electronics. Setting the Drive Depth The NT18B07 is designed for 18-gauge brad nails
Check the battery charge level. If the battery is full but power is low, the internal air pressure seal may require professional servicing. Storage and Care Store the tool in a dry, room-temperature environment. Wipe the exterior with a clean, damp cloth after use. Insert a fully charged 18V Lithium-Ion battery into
Press the release button to let the pusher slide forward against the nails. Operating Instructions Follow these steps to achieve clean, professional results: Powering On
Controls how deep the nail is driven. Magazine: Holds the strips of 18-gauge brad nails. Pusher Lever: Pulls back to allow nail loading.