Connect the alternator output phases so the controller knows when the generator has reached the correct voltage and frequency. Control Outputs: Start: Connects to the starter motor relay. Fuel: Connects to the fuel stop-solenoid.
The controller is disabled. No automatic functions will occur, and the engine cannot start. Use this mode during maintenance. lovato 31 rgam 12 user manual
While the physical booklet is often tucked away in a control panel, this guide serves as a comprehensive overview of the technical specifications, wiring logic, and programming steps required to get your RGAM 12 up and running. 1. Device Overview Connect the alternator output phases so the controller
Before wiring the device, ensure your system matches these electrical requirements: The controller is disabled
The back of the RGAM 12 features a series of screw terminals. Accurate wiring is critical to prevent damaging the controller or the generator’s alternator. Basic Terminal Mapping: