Transfer photos, videos, documents, and entire folders between your Android phone and Windows PC — instantly. No cables, no cloud uploads. Just fast, secure wireless sharing.
Connect a standard Cat5e/6 cable to the RJ45 port for communication with the OnGuard server.
Typically used for communication speed settings.
Installation Guide for the Lenel OnGuard LNL-3300-M5 Intelligent System Controller
Use a dedicated, battery-backed power supply to ensure the controller remains operational during local power outages. Step C: Network and Serial Connectivity
Once the hardware is powered and wired, you must add it to the OnGuard interface: Open . Navigate to the Access Control tab and select Panels . Add a new panel and select LNL-3300 as the type. Enter the IP Address assigned to the controller.
Get started in less than 2 minutes — choose your platform below.
Make sure your devices meet these requirements before downloading.
Windows 10 or Windows 11 (64-bit). Older versions like Windows 7 and 8 are not supported. lenel lnl3300m5 installation manual upd top
Both Wi-Fi and Bluetooth must be enabled on your PC. Most modern laptops have both built-in. Connect a standard Cat5e/6 cable to the RJ45
Android 6.0 (Marshmallow) or higher. Quick Share is pre-installed on most Android 13+ devices. lenel lnl3300m5 installation manual upd top
Devices should be within ~30 feet (10 meters) of each other for optimal transfer speed.
64-bit processor required (Intel or AMD). ARM-based Windows PCs are also supported.
Minimum 150 MB free space for installation. Plus enough space for received files.
You'll be transferring files like a pro in under 2 minutes.
Grab the Quick Share app from the official Android website. Installation takes less than a minute on most Windows PCs.
Make sure Bluetooth and Wi-Fi are enabled on both your phone and PC. They need to be nearby — within about 30 feet works best.
On your Android phone, select the photos, videos, or documents you want to send. Tap the Share icon and choose Quick Share.
Your PC will pop up a notification. Click Accept, and watch your files appear in the Downloads folder within seconds!
Connect a standard Cat5e/6 cable to the RJ45 port for communication with the OnGuard server.
Typically used for communication speed settings.
Installation Guide for the Lenel OnGuard LNL-3300-M5 Intelligent System Controller
Use a dedicated, battery-backed power supply to ensure the controller remains operational during local power outages. Step C: Network and Serial Connectivity
Once the hardware is powered and wired, you must add it to the OnGuard interface: Open . Navigate to the Access Control tab and select Panels . Add a new panel and select LNL-3300 as the type. Enter the IP Address assigned to the controller.
