The is a classic, fully automatic microprocessor-controlled vacuum ceramic furnace designed for high-precision dental laboratory applications . Known for its reliability and straightforward numeric keypad entry, the P100 remains a staple in many labs for firing dental ceramics. 1. Setup and Installation
Verify that your local voltage matches the rating plate before connecting the supplied power cord.
Periodic calibration is essential as physical impacts and residue can cause slight shifts in temperature accuracy. Programat® ivoclar programat p100 manual english
Place the unit on a flat, level surface away from heaters or other heat sources. Ensure at least 110 mm of space behind the furnace for the swivel movement of the furnace head and adequate air circulation. Connections:
Turn on the power switch at the rear. The furnace performs a self-test before displaying the standby screen. Program Selection: Enter the desired Program Number ( ) using the keypad. Press START ( Setup and Installation Verify that your local voltage
Connect the pump to the dedicated socket at the rear. It is highly recommended to use an original Ivoclar Vivadent vacuum pump to ensure compatibility with the furnace’s power consumption limits.
To ensure safe and optimal operation, follow these installation guidelines: Ensure at least 110 mm of space behind
or 62) to begin the firing cycle once the furnace reaches the standby temperature (