Download the Mac Driver: Download the macOS-specific driver package (usually a .dmg or .pkg file).
Finish: Click "Finish" to complete the installation. You should now see the printer in your "Devices and Printers" control panel. 3. Driver Installation for macOS
Calibration: Press and hold the Feed button until the status light flashes. The printer will measure the label size and gap to ensure precise printing. 2. Driver Installation for Windows instal xprinter xp-d4601b
Run the Installer: Open the .exe file. Select "Install Printer Driver" when prompted.
Load the Labels: Open the printer cover by pulling the release tabs on the sides. Place your thermal label roll into the media holder. Pull the first label out slightly past the tear-off bar and adjust the media guides so they snugly fit the width of your paper. Download the Mac Driver: Download the macOS-specific driver
Connect to Computer: Use the provided USB cable to connect the printer to an available USB port on your PC or laptop.
Install the Package: Double-click the installer and follow the on-screen instructions. You may need to enter your Mac password to authorize the installation. Configuration and Print Settings
Specify the Port: Choose "USB" as the port type. Windows usually assigns a virtual USB port (e.g., USB001) automatically.
To get the XP-D4601B recognized by your Windows system, you must install the correct thermal printer drivers.
Select XP-D4601B: Select the printer from the list. In the "Use" dropdown menu, click "Select Software" and search for "Xprinter" or "Label Printer." Confirm: Click "Add" to finalize the setup. 4. Configuration and Print Settings