Hxc-fw-installer.hex

Connect the drive to your computer using your chosen cable.

Depending on the drive model, you may need a USB-A to USB-A cable or a USB-to-Serial (TTL) adapter . Hxc-fw-installer.hex

For many drives, you must place a jumper on the BOOT0 pins to put the device into programming mode. Connect the drive to your computer using your chosen cable

Update procedure. Strap the BOOT0 signal as shown on the above picture. Connect the Gotek to your PC with the USB A USB A cable. ( HxC bootloader installation - HxC2001 Update procedure

The primary purpose of hxc-fw-installer.hex is to prepare a "blank" or factory-stock Gotek drive for the HxC ecosystem. Once this .hex file is flashed onto the drive's internal memory, it installs a specialized bootloader that enables future firmware updates to be performed simply by using a USB stick, eliminating the need for further hardware-level programming. Prerequisites for Installation