Huawei Flash Tool Idt 20 Better ((top)) May 2026

Click on the or setting button to open the configuration.

The Huawei Image Deployment Tool (IDT) is a professional utility designed to flash XML-based firmware directly to the board of a Huawei device.

Ground the test point to the metal shielding using your tweezers. huawei flash tool idt 20 better

⚠️ Using IDT 2.0 requires opening your phone to access physical test points. This will void your warranty and carries a risk of permanent hardware damage if done incorrectly. Proceed at your own risk. Phase 1: Prerequisites A PC running Windows 7, 10, or 11. The Huawei IDT 2.0 software package. Huawei USB COM 1.0 drivers installed on the PC.

Unlock Your Device: Why IDT 2.0 Is the Better Huawei Flash Tool Click on the or setting button to open the configuration

Open your PC's . You should see HUAWEI USB COM 1.0 under the Ports section. If you see it, release the tweezers. Phase 3: Flashing the Firmware

Flashing board software for a different model (even a slightly different sub-model) will permanently hard-brick the processor. ⚠️ Using IDT 2

Extract the IDT 2.0 tool and run the executable as an Administrator.

Tailored specifically for HiSilicon Kirin chipsets.

Browse and select the .xml file from your extracted Factory Board Firmware folder.