Follow the on-screen instructions in the portal to scan for and select your home's 2.4 GHz Wi-Fi network. Enter your network password when prompted. The camera's LED will turn once it has successfully connected to the internet. 5. Add the Camera to Your Alarm.com Account
Using a smartphone or computer, search for available Wi-Fi networks. Connect to the network named , where "XX" represents the last six characters of the camera's MAC address. 3. Access the Configuration Portal
Troubleshooting : If the LED is not blinking white after two minutes, hold the for about 6 seconds until it begins to blink. 2. Connect to the Camera's Temporary Wi-Fi http v515 install
: An active Alarm.com account with a service package that supports video.
: A 2.4 GHz Wi-Fi connection. Note that the does not support 5 GHz networks. Follow the on-screen instructions in the portal to
Before starting the installation process, ensure you have the following ready: : Your camera and its included AC power adapter.
With the camera online (solid green LED), you must link it to your security account: 1080p Indoor Wi-Fi Camera Installation Guide - Surety Before starting the installation process
The "http://v515install" URL is a critical web-based interface used to set up the Alarm.com ADC-V515 1080p Indoor Wi-Fi Camera Go to product viewer dialog for this item.
. This address allows users to connect their camera to a local 2.4 GHz Wi-Fi network when using Access Point (AP) mode. Pre-Installation Checklist