Hpe: Smart Array S100i Sr Gen10 Sw Raid Driver For Windows Server 2022

The download is typically an .exe file (e.g., cp052316.exe ). Crucial Step: You must run this file on a separate PC and select the Extract option to get the actual .inf and .sys driver files. Step-by-Step Installation Guide 1. Enable SW RAID in BIOS

Browse to the folder and select the driver. Once loaded, your RAID volume will appear. The download is typically an

Navigate to > BIOS/Platform Configuration (RBSU) > Storage Options > SATA Controller Options . Enable SW RAID in BIOS Browse to the

Change to Smart Array SW RAID Support . Save and reboot. 2. Configure Your RAID Array Change to Smart Array SW RAID Support

Insert the USB drive containing your driver files.

The S100i is a "software RAID" (SW RAID) solution integrated into the motherboard of many HPE ProLiant Gen10 servers. Unlike high-end "P-class" hardware controllers that have their own dedicated processor and cache, the S100i uses your server's CPU to manage RAID levels like 0, 1, 5, and 10.

Setting up a server often hits a roadblock when the installer can't find your hard drives. If you're using an HPE Gen10 server with an embedded controller, you likely need the to bridge that gap. What is the HPE Smart Array S100i SR Gen10?