If it fails with a "Failure ID," the drive is likely defective and requires replacement. Data Recovery and Replacement
Since the 313 error is often a connection issue, physically re-establishing the contact point is the most effective fix. Open the back panel of your HP device. Locate the M.2 NVME SSD. Unscrew the mounting screw and gently pull the drive out. Clean the gold contacts with a dry, lint-free cloth. Firmly slide it back into the slot and replace the screw. 3. Update the BIOS
HP frequently releases BIOS updates to improve compatibility with NVME controllers. Use another PC to visit the HP Support site. Enter your serial number. Download the latest BIOS update to a USB flash drive. hp nvme ssd -313- error
💡 If the drive is still partially readable, boot from a Linux Live USB or use an external NVME-to-USB enclosure on another computer to pull your files immediately.
If you'd like to check your or find compatible replacement drives : Your HP model number Whether the drive shows up in the BIOS If you have a recent backup of your data If it fails with a "Failure ID," the
When you see "Hard Drive Error -313-" or "SSD Error -313-," it is a hardware-level alert. Unlike software crashes, this error happens before Windows or macOS even begins to load. It essentially means the system "lost sight" of the storage drive. Common triggers include: Physical loosening of the M.2 drive. Outdated BIOS firmware. Excessive heat causing the controller to shut down. Physical NAND flash failure. Step-by-Step Troubleshooting 1. Perform a Hard Reset
If the drive is under warranty, provide the 24-digit Failure ID to HP Support for a free replacement. If not, consider upgrading to a high-quality third-party NVME SSD (like a Samsung 980 or WD Black) which often offer better thermal management than OEM drives. Locate the M
Use the "Firmware Management" tool within the HP UEFI menu (F2 at startup) to flash the update. 4. Run HP PC Hardware Diagnostics