Galaxy Aqua Premier Installation Manual Access
Do not install the unit where it may be exposed to freezing conditions (e.g., outdoors).
Before beginning, confirm your unit matches these requirements:
Use the backplate as a template or mark the three fixing positions. The top hole is usually a "key-hole" slot; drill this first and tighten the screw so it protrudes about 10mm. galaxy aqua premier installation manual
Installation must be performed by a qualified person and comply with current IEE Wiring Regulations and local Water Authority bylaws.
Features multiple cable and water entry options for flexible replacement. Pre-Installation Safety Checklist Do not install the unit where it may
Ensure the electricity supply is isolated at the consumer unit before removing the shower cover. Step-by-Step Installation Guide 1. Positioning and Fixing
Minimum Running Pressure: 1.0 Bar (15 psi) at 8–9 litres/minute. Maximum Static Pressure: 10 Bar (150 psi). Installation must be performed by a qualified person
Hook the unit over the top screw, align it using a spirit level, then mark and drill the remaining bottom fixing holes. 2. Plumbing Connections Galaxy Aqua Premier Water Heater 9.5Kw - 45793266
Typically 9.5kW (also available in other variants).
Choose a flat wall surface to avoid distorting the backplate.
