: Visit the official FNIRSI Support Page to find the latest .bin file (typically named FSI-1014.bin ).
: Some users report a 200mV difference between channels even after updating to V3.0. If this occurs, perform a manual calibration through the device settings without any probes connected. Custom and Community Firmware FNIRSI 1014D - How to do a Firmaware Upgrade Tutorial
: Copy the FSI-1014.bin file directly to the root of the oscilloscope's drive. fnirsi1014d firmware update work
: Use a USB data cable to connect the oscilloscope to your computer.
: If the display appears shifted to one side after updating, you likely have a different hardware version of the screen. FNIRSI released two variants of V3.0 to account for different display manufacturers. Re-updating with the alternative V3.0 file usually fixes this. : Visit the official FNIRSI Support Page to find the latest
: Properly "eject" or "unmount" the drive from your PC before physically disconnecting the cable.
The update process for the FNIRSI-1014D is straightforward but requires careful adherence to the following steps to avoid "bricking" the device: Custom and Community Firmware FNIRSI 1014D - How
The is a standard procedure for resolving system bugs, improving measurement accuracy, and fixing UI issues like screen misalignment. As of 2026, the most stable official release is Firmware V3.0 . How to Perform the Firmware Update
: If the device fails to boot after an update, you may need to manually format the internal SD card. This requires opening the device, removing the card, and formatting it to FAT32 on a PC before reinstalling the firmware.
: Visit the official FNIRSI Support Page to find the latest .bin file (typically named FSI-1014.bin ).
: Some users report a 200mV difference between channels even after updating to V3.0. If this occurs, perform a manual calibration through the device settings without any probes connected. Custom and Community Firmware FNIRSI 1014D - How to do a Firmaware Upgrade Tutorial
: Copy the FSI-1014.bin file directly to the root of the oscilloscope's drive.
: Use a USB data cable to connect the oscilloscope to your computer.
: If the display appears shifted to one side after updating, you likely have a different hardware version of the screen. FNIRSI released two variants of V3.0 to account for different display manufacturers. Re-updating with the alternative V3.0 file usually fixes this.
: Properly "eject" or "unmount" the drive from your PC before physically disconnecting the cable.
The update process for the FNIRSI-1014D is straightforward but requires careful adherence to the following steps to avoid "bricking" the device:
The is a standard procedure for resolving system bugs, improving measurement accuracy, and fixing UI issues like screen misalignment. As of 2026, the most stable official release is Firmware V3.0 . How to Perform the Firmware Update
: If the device fails to boot after an update, you may need to manually format the internal SD card. This requires opening the device, removing the card, and formatting it to FAT32 on a PC before reinstalling the firmware.
