Insert a USB drive (at least 4GB; note that Kingston drives are often incompatible with Liso). Select the downloaded .gz image and flash it to the drive.
If you still have access to the device and only need to change settings without a full wipe, use the : Tap the Menu/Information icon on the screen.
: Reconnect the power. The Liso will automatically detect the USB drive and display a 30-second countdown before starting the flash. evoko liso factory reset verified
: Disconnect the PoE or power cable from the back of the Liso.
To perform a on an Evoko Liso room manager , you must use a bootable USB flash drive containing the official firmware reset image . Unlike many consumer devices, the Evoko Liso does not have a simple "factory reset" button; the pinhole on the bottom of the unit is for rebooting only and will not wipe data or configuration settings. 1. Prepare the Reset USB Drive Insert a USB drive (at least 4GB; note
Ignore any Windows prompts to "format the drive" after flashing; these occur because the Liso uses a non-Windows partition. 2. Execute the Factory Reset
You cannot simply copy files to a thumb drive; it must be "imaged" to become bootable. : Reconnect the power
Select and enter your PIN or use an authorized RFID.
: Use a tool like balenaEtcher or Win32 Disk Imager .
This process will erase all configuration, unpair the device from Evoko Home , and revert the firmware to the version on the USB.