Chaser Che80 Print Driver Verified -

The Chaser CHE80 often uses standard or XP-80 driver architecture. If the specific "Chaser" branded driver is unavailable, verified drivers from the following sources usually work:

If using a Serial connection, ensure the baud rate in the driver matches the printer's internal settings (usually 9600 or 115200).

Thermal printers are sensitive to cable length. Use the original cable provided with the unit. Garbled Text or "Hieroglyphics" chaser che80 print driver verified

Plug the CHE80 into a power source and connect the USB cable to your PC. Turn the printer on.

Go to Printer Properties > Ports. Ensure the correct USB port (e.g., USB001 or USB002) is checked. The Chaser CHE80 often uses standard or XP-80

Open the .exe file (usually named POS Printer Driver Setup ).

Select USB if you are connected directly. If it's a network model, select Ethernet . Use the original cable provided with the unit

This usually happens if you install a 58mm driver for an 80mm printer. Reinstall using the POS-80 verified driver. Paper Not Cutting (Auto-Cutter Issues)

While many modern laptops lack a disc drive, the physical CD that comes with the Chaser printer contains the original, verified driver files. If you’ve lost the disc, look for the manufacturer’s official support portal. 2. Common Compatible Drivers

Once the installation finishes, go to Control Panel > Devices and Printers . Right-click on the new printer and select "Printer Properties," then click Print Test Page . Troubleshooting Common Driver Issues