61.c4.d3 Error May 2026

A standard reset can often clear temporary firmware glitches that trigger 61.xx errors. Turn off the printer using the power button.

For PageWide models, check the small interior space in the top left corner to see if the print-bar is in the "up" or "down" position. A black block visible in the opening indicates it is correctly in the "up" position. 3. Troubleshoot the Formatter Board 61.c4.d3 error

In many instances, this error code is associated with a physical blockage. If the printer is brand new, it often occurs because the (located behind the door with the HP logo) was not removed. In older units, it may indicate that the print-bar has "slammed" against the service sled or that a mechanical part has failed due to wear or damage. Step-by-Step Troubleshooting Guide 1. Perform a Power Reset A standard reset can often clear temporary firmware

Sometimes a faulty network or telephone cable can cause communication errors. Try booting the printer with all cables (USB, Ethernet, Fax) disconnected to see if it reaches a "Ready" state. 4. Update or Reinstall Firmware A black block visible in the opening indicates